Okay - little bit more progress, I know I know slow go...but it is tough to find the time as with everyone else. So I got the oil lines and cooler back on, sheared off the ears on my banana arms for the big brake mounts. I wanted to get a status on the way the lines are run - to be sure they are correct before I tighten everything up for good and add the last brackets. Need to set spring plate angle and then move to the front. I guess as it goes when you disassemble things (5 years ago) and then go to put back together you are either missing some stuff or planned on getting some new stuff. Trying to figure out some good bolt corrosion protection besides powdercoating or plating (pia). I can clean the bolts up real good with a wire brush but then they need protection. Also took the time to clean wheel wells and the underbody, lots of citrus orange for that.
Anyway here are some pics - let me know what you think and if those lines look correct...
Short hose on the outter, longer hose on the inner?
The oil line with kink in it for the jack hole on the outside?
