|
Cold start issue?
Just rebuilt my 1980 930 engine and it runs GREAT! I timed it at 29 BTDC @ 4000rpm and adjusted the AFR from 11 to 14 at warm idle and runs smoooooooth.
Shut it off and went back to it a couple hours later and wouldn't start. Seems like no fuel since spark was good. Is this a typical WUR issue or something else with a new rebuild?
WUR worked fine before the rebuild so I am a bit surprised if it doesn't work now.
Could it be something else that I overlooked?
Any thoughts?
Thanks
__________________
Millhaus
|