|
I agree with Bill. You are regulating the pressure down with a cheap regulator, before it gets to a really nice regulator. You are also restricting flow. Let the PMO regulator do what it is supposed to do.
You have an issue with the return line. Same issue I am currently trouble shooting.
When I hooked my system up per the PMO instructions the pressure was 12 psi wide open. When I disconnect the return line after the regulator and dump it right to a gas can, the pressure is less than 4 psi. That indicates I had >8 psi drop in the return system.
Hook it up per the PMO instructions. Determine where the return blockage is and fix it.
__________________
“The wave is not the water. The water merely told us about the wave moving by” – Buckminster Fuller
|