|
They are all fuzzed out and don't show much. The job was not that bad to do. I don't know how different your 06 is compared to my 01. I un-did the bottom four bolts for the balljoint assembly and the tierod. I removed the outter axle nut and swung the whole assembly to the side. Then took two big prybars and popped the inner joint out of the differential housing. The seal is right there.
My Toyota parts guy hosed me though. Turns out that the TRD equipt trucks use a bigger seal. I had it all apart and that was my ride home. Grrrrrrrr! My wife bailed me out. They had the seal the next day for me.
If you do it your self, make sure you give them a vin number.
__________________
Dan
2002 996 C4 Cab w/ Jake Raby 4.0
2024 Tacoma TRD Offroad 4x4
2003 Range Rover HSE
|