Small update - got the struts in, t-bars, caps indexed, strut top plates, steering gear hooked back up, tie rods done, RUF sway bars in (23m front)...and what would an update be like without pics? So here are a couple...
So couple of questions - I tried to get my caps on the bars as close to 4 and 8 as possible, there does not seems to be enough fine adjustment in the splines so they are as close as I could get. Got about 10mm on the adjuster bolts...I guess i will see when it touches the ground where that leaves me and plan for some final tweaking.
On the strut top mounts what is a good reference point to start with for alignement - center the thing? No idea what position to tighten it down to.
Going to need some type of strut bar - my preference is for one of the weld in types, simple, straightforward and light. Not sure about the triangulated ones...opinions welcome - thanks.