|
I just bought 2 kits from Epoxy Coat not too long ago. Haven't put it down yet, so I'll be able to speak more authoritatively after I do. I do have the garage cleaned out though and will start grinding the floor using a 9" grinder with a 7" diamond disk to rough it up. I decided to do that instead of using the etching solution because I had reinforcing fiber put in the slab mix when it was poured. I was thinking it would be super expensive to have somebody come in and do the grinding, so I checked out good ole Harbor Freight. They had 9" grinder for around $45 and the 7" diamond disk for around $45, so I decided to give it a try myself. I gave a small patch a shot already, and it seems like it will be reasonably easy. I will just hold on to the handle of the grinder and let it float over the surface of the floor. I'll also have to use a respirator because it's going to kick a huge amount of dust.
__________________
Marv Evans
'69 911E
|