Here the inlet manifold with MAP sensor, TPS and Idle solenoid
TPS from Turbokraft with longer shaft to link sensor:
Selfmade bracket with rubber cushion against vibrations:
No more need for cold start valve
Injectors 550cc/min (from five-o #915550715550). Note: I had to machine the lower area (on pic left the last 7mm before cap), because you get measurements for both side seals, lenghth, but not the everything between, they were to thick in this area, could not slide in enough for correct fit. Now they do
And here some more parts like fuel line, fuelrail , FPR and airfilter I will use:
