|
At the edge of the piston (like you show in your pics) I measured 1.0 mm. When using the Flux Core wire like Walt at Competetion and Wayne outlines.... the same piston is slightly over 1.25, almost 1.5 mm. So I am not sure that the flux core piston measurement is going to always be exactly in synch with the edge of the piston measurement. The measurement you show is generally for Flat Top pistons. Just my understanding of it. I am by no means an expert...
__________________
83 SC Targa -- 3.2SS, GT2-108 Dougherty Cams, 9.5:1 JE Pistons, Supertec Studs, PMO ITB's, MS2 EFI, SSI's, Recurved Dizzy, MSD, Backdated Dansk Sport Stainless 2 in 1 out, Elephant Polybronze, Turbo Tie Rods, Bilstein HD's, Hollow 21-27 TBs, Optima Redtop 34R, Griffiths-ZIMS AC, Seine Shifter, Elephant Racing Oil Cooling.
Last edited by brads911sc; 01-07-2011 at 06:31 AM..
|