OHHHH, ya want places to buy????
Well here goes......
Oil tank.....bit of a debate here. Some have the Porsche only 30mm fittings....others have -AN fittings......
30mm fittings are expensive.....so are the oil lines. AN fittings are cheaper, but the tanks usually don't have baffles and are of less than oem construction......
Oil lines....30mm Porsche are expensive.....see the trend here? AN ones can be custom built.....
Engine mounts......there are a couple of under body ones that bite the big one......"I" prefer the bulkhead ones....Rich Johnson makes one of the best ones out there......he didn't take credit cards or COD back then....may have changed....but he is one of the few honest ones out there.....you can trust him, MAJOR CLASS ACT. If he has nothing in stock, Pelican and GPR can help.
Rich also has lines on tanks, sheet metal and oil lines......
a914guy@aol.com
SHEET METAL.....fiberglass sucks, go with metal.....not a lot of choices....BRING $$$$$, Rich has them too...sometimes....
Flywheels....I have dealt with Kennedy Engineering since 1978....they are a VERY good resource. Go with the bigger clutch face (228mm aka 9 inch) and the kevlar disk.....it's "Mikey" proof....just ask anyone who has seen the burn outs from "The Rocket".....
More ???? Just ask......