Quote:
Originally Posted by jwasbury
I have the LC-1 and DL-32, so very similar to your set-up (I do not have the XD-16, however).
I don't have an option for LC_1_AFR either. I believe there is only one channel LC_1_O2 and you can select between AFR and Lambda display modes in the Logworks software "Channel" menu.
Curious if you have successfully monitored the output of the LC-1 or LMA-3 on your laptop using logworks. I wonder if your XD-16 is working correctly. The numbers you are seeing would not seem to be Lambda readings...it could be that the first digit isn't appearing so that instead of seeing a reading of 14.7, you see 4.7. Just a thought.
|
Just back form the garage. This seems tricky...
My menu setup is as you describe it. It is set up for O2 and AFR.
I have not yet been able to monitor anything using the labtop. I have just been out there for an hour.
About my indications; I have been thinking the same thing as you mention. I don't hope that is it. The AFR really doesn't change even when on boost, coasting etc. Well is does change a little but nothing like between 11.5 to about 14 as I would hope. once the car is warm it is pretty stable in the high fours, drops just a tad when I punch, but not much (this is just memory. I only took one drive in it yesterday).
When I went out there today, I started out with the XD-16 programming. I did some scale adjusting (chose 9.9-15) and then colored the gauge. IT was all done reading and following the manual.
THen I went on to the LMA-3. Again manual in hand. I did the CAL. Which I think went OK.
After that I started on the programming. Right in the beginning I had problems. I couldn't find a firmware file. This is the first thing to do -hmm. I skipped that and hope it wouldn't prevent anything.
MAybe it did, because from there it didn't go to well.
I tried to program the channels (The LMA-3 is plugged as laid out in the manual). When I hit the program button on the screen, nothing happened, it just froze.
I then (just to try something) opened the logworks software maybe I could see different AFR indications this way. I could not get any indications.
I also chacked the XD-16 indication, to see if my latest attempts had changed anything. Nothing. When the car is cold the indication read high 3s and then moves to about high 4s to low 5s
I don't know where to look and what to look for exept for the firmware update which I need to find - I guess.
Thank you for your help