Quote:
Originally Posted by fanaudical
When in a pinch, I have sometimes purchased the correct-sized bolt and then cut a couple of grooves in the threads with a cut-off wheel on a Dremel tool. I clean up the threads with a die following the grooving. It's a cheap thread chaser if you can't find one.
|
+1 This is what I did to clean out the case stud holes. Used a dilavar stud and cut 4 grooves and chased the threads. Worked like a champ!
__________________
 Michael
'82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah
'13 Cayenne GTS
|