|
The cable/wire should be somewhat thick, like the starter wire is just not to thin. I would pull the wire off of the coil, runs from coil to top of distributor, that way the car will not start-up the engine with you under it...safety first! The ignition switch probably doesn't matter what position, since running the "hot" wire to from the battery to the starter is a direct connection. The ignition switch acts as a go between...opens or closes the electrical circuit to the cars starting ignition system.
Be safe and good luck.
__________________
Ed Paquette
1983 911SC
1987 944S
1987 944 Manual (Donated to the Nat. Kidney Foundation)
1987 944 Automatic (Recently sold to another Pelican)
|