[bazar01]

Hey BW, I have not done much after draining the power steering and undoing the lines. Been working late at work, already to tired to work on the P.

I don't think you have to drain the gas tank. Just undo the left side return and right side at the filter supply line and you should be okay.

List of things to do.
I already have the half shafts removed during the bearing change.

1. Remove the a/c compressor and move to the side quarter panel.
2. Undo the big oil filter oil line fitting on the pass side. DONE
3. Undo the transmission shifter DONE
4. Unwire the starter and ground to chassis
5. Undo the second oil line hose on pass side DONE
6. undo the accelerator cable (debating whether at the pedal or at the engine)
7. remove HE hoses DONE
8. remove the slave cylinder from the bell housing and move out of the way
9. remove sway bar DONE

I guess that's it and should be ready to drop by undoing the transmission mount then the two rear engine mounts.