|
What do you need to know about them? One trick is to use double sided tape to hold the drawer fronts in place, then pull the drawer out, clamp, and screw from inside. Another trick is to drill the screw holes about 1/8" larger then the screw shank on the drawer boxes. This way, you can have a little adjustment if needed. the large washer head screw will hold it in place and cover the larger hole as well. Once set, drive in a couple more screw home to hold it in place. I think its a lot better then those drawer front adjusters. We use to use them in our cabinets. It was too much set up time. sometimes the old way are faster and better.
|