[MPDano]

Today after I said "f%$# it," I'm going to do some work on the "S." So I took all my Powdercoated pieces and used my Ryobi sanding Mouse to get rid of some of the powdercoat overspray from the flat pieces that will sit on the head. After making sure all 8 Spider Legs were nice and flat and clean, I noticed a very fine grit inside the tubes. Anyone getting your Intake Pieces Pwdercoated, make sure to rinse them of all blasting grit. I used my high pressure hose and cleaned all my parts to include the Spider Body and Fuel Rails.

I also started to clean my grounds (per Landseer) on the Passenger Cylinder Head and decided to rebuild my Fuel Hoses too. I have a Fuel Cooler so I will be rebuilding 3 hoses.

Here's the pieces of my pieces.


"""Looks like Pelican is having a picture upload fail"""