|
sounds to me like you need to bleed the coolant system. If you have air in the h. core..no heat.
start car and set heat to full hot, run until radiator fans run and cut off ( thermostat open ), then open the bleed valve and leave open until you get a good STEADY stream of coolant for 15sec or so. Close bleeder.
If the vac line is off the heat control valve, you should have continuous heat!
__________________
Bruce P.
2011 Cayman Base, LSD, Sport Chrono.
1988 951 totaled and missed 
"You're the best I ever had" --JJ Cale
|