|
Registered
Join Date: Sep 2001
Location: Mt Sinai , Long Island N.Y.
Posts: 4,617
|
I noticed when I installed a fresh set of hood struts the line running down the fenders was different with the hood being about 1/8" higher. I fixed it by tightening the adjustment at the latch. At that time I also found the locknut on the male part of the latch was about 5 turns loose. So im not sure if it was the new struts or just the adjustment came loose. You could easily disconnect the tops of your hood struts and see if the gap disappears.
Kurt Williams
__________________
Never drive faster than your gaurdian angel can fly.
82 SC w/965S eng and G50 6:1 hp/w ratio
72 911t 2.6 twin plug and 72' 911t 57k orig 1 own miles
65/66 912 1 owner 76k orig
01' Aston Martin DB7 V12 Vantage Coupe 6spd
|