Quote:
Originally Posted by 89911
There called Tap Cons and I like them too for most applications. Using a drill with a hammer drill setting makes it go a lot faster. I used them recently to hang garage cabinets. Get the hexagonal heads and go easily when drilling the screws in, they strip easy.
|
Yep tap cons are genreally the best for anchoring into concrete. Excellent advice if they be bind up in the hole they will snap. So drill the proper diameter hole, set your drill on the lowest tork setting and work your way up or use a ratchet by hand. Shooting in a fatsener such as a Hilti can be good also but can cause damage if it is to close to and edge and older concrete can sometimes just blow apart.
