|
Proprietoristicly Refined
Join Date: Jul 2001
Location: ~Carefree Highway~
Posts: 5,833
|
924,
quote "I bought a new seal kit for the oil cooler, hoping that will fix that problem. When I drained the oil, it didn't look bad at all (no coolant/water), only about 200 miles since the last change. Any input welcome" end quote.
Do you have the OPRV alignment tool required to align the oil cooler housing on the block?
Make sure you lube the 2 big "O" rings on the oil cooler or they will roll over and leak.
Did you get the OPRV aluminum crush washer? If not it will drip.
GL
John
__________________
1988 924S, 85,750K ..+ 1987 924S, 154K DD (+15K est. bad odo)
|