|
Schleprock
Join Date: Sep 2000
Location: Frankfort IL USA
Posts: 16,640
|
Good point Bill. The switch does not screw directly into the case. There is an adapter fitting (the black piece in my picture) and I agree the threads should be the same as Bill mentioned.
I think Draco is referring to the threads on the switch itself, which I do recall are M10 x 1.0 (which incidentally is the same size as a brake line tube nut, in case a test fit was needed to check thread size)
__________________
Kevin L
'86 Carrera "Larry"
|