|
There are two 5mm holes on the backside of the wheel hub. The factory says to us a long 4mm punch and drive the horn button out of the steering wheel recess. But usually with age the rim of the horn button corrodes to the steering wheel recess and employing this technique usually ends up with two punched holes through the plastic button.
I use a snapon small puller set. This has a small slide hammer with a right angle attachment. I slide the right angle attachment (with masking tape on it to prevent scratches) under the chrome rim of the horn button assembly (pressing the plastic down) and very gently use the slide hammer tapping (pulling upwards) all around the circumference of the chrome rim. It will take a little time but with no damage to the horn button.
|