|
Busta Rib, I bought a Wevo and took it apart, then returned it...its simply a square block with slip fit dowel pins at 90 degress from each other for $200....I thought maybe it was a bearing or mono-ball... nope... that is why I decided to make my own using the factory parts outside...(looks stock) zero lash means its as good as the Wevo (and most likely the one you picked up) - but that's because I have the means to do it (as do many of these guys) - point is if you can do it for under $10 and some time, and you like to, then it is an option for those who have the machines beit a lathe or mill
BTW the first set I made I just used a dremel to remove the largest outter diameter so they fit in the coupler... now those "ears" are machined in
__________________
Ed M
86' Coupe
|