|
928: Serial Enabler
Join Date: Sep 2007
Location: Elkhart, Indiana
Posts: 2,929
|
These self-center for me.
Good point on cleaning before removal. I use small brushes and vacuum.
And always vac out holes themselves with heater hose attached to vac.
For tools, I'm using a spark plug socket. But using quarter inch drive extensions and a quarter-to-3/8 step-up adapter at the socket.
If the extension separates from the socket, long needlenose will remove.
Benefit of 1/4 extension - allows clearance with fenders, etc, but allows straight shot to socket/plug.
__________________
84,85,86 928 cars
|