|
Under the radar
Join Date: May 2007
Location: Fortuna, CA. On the Lost Coast near the Emerald Triangle
Posts: 7,129
|
Didn't check the gear numbers, but looked at the teeth and they showed no unusual wear.
I did not remove the center housing roller bearing races, and the outer races seemed tight.
Did I mention that the trans is out of a '72 911 which was wrecked?
I opened the fill hole and fluid started to come out.
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage
|