[TRE Cup]

We have been giving some thought to the larger capacity gas tanks. Some of you have thirsty motors and asked if we could extend the driving range.

With "correct" replica ST and RS tanks going for over $2k (real ones being either fragile or unobtanium $) , Fuel Safe 911 cells from $2500 and up, we are wondering if there is a market for a well built aluminum fuel tank.

For this particular offering, we are thinking a capacity between 22 and 27 gallons. We are NOT trying to emulate the old school look here, but would offer some filler neck options if you are after the thru hood look.

Specs would include:
drop section for fuel pickup and return- no starvation under cornering or low fuel level loads

baffles to reduce instant side loads from fuel slosh

aluminum construction for no corrosion long life- available in variety of coatings

center or off set fill options- either under or thru hood (using blau 102 mm caps, or monza flip top)

roll over valve for venting and filler neck
aftermarket level sender compatible to oem gas guage

fiberglass "mimic" undertray that seals the bottom opening of oe gas tank . Looks like the oe tank from under the car and keeps the smooth air flow.

Cost estimated in the $1600-1900 range depending on finish and cap options.

This tank would not be legal for track use, where an approved bladder/ foam is required. But would be for DE use in most classes.

What are your comments on this low volume production tank ?

Thank you for your thoughtful input