|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,565
|
The fuel pressure regulators are on the front corners of the fuel injection, right and left.
The injection comes off easily enough, in 2 sections plus the small parts. If youre going to do this, I suggest you also replace the hoses on the main feed from the filter to the hard line and then the 2 hoses from the hardline to each fuel rail. The piece is about $500 but you can use your old one and replace the rubber pressure lines/
Any way, pull the air filter and airflow sensor and it gives you a lot more room on the top to work
What you ultimately want to replace is the vacuum pods on the front corners of the injection and the while youre there, replace the fuel lines.
Be careful of the flywheel sensors wires, they crush under the manifold if they get in the way.
I know from experience....
Bruce
|