|
1. an additional seal can be used between the windshield frame seal and windshield frame. it sits at the edge of the targa top when the roof is in place. the part # is 911.799.565.25. unfortunately, i don't know if this part is still available.
2. you can adjust the tension of the top by approx 15 mm on each side. to do this, remove the lateral targa seal and rain gutter. then undo the cover, tension it (but don't over tension it), and bond it back in place. reinstall the gutter and seal. btw - try doing it on one side first to see if you get adequate tension.
3. another fix is to place your top upside down on a soft surface. using a rubber mallet, carefully hammer out some of the creases at the front of your top. when you do this, it helps to raise the opposite end 40 mm to slightly bend down the front edge as you hammer.
i got this info from porsche...
good luck.
|