|
Try not, Do or Do not
Join Date: Apr 2004
Location: Fallbrook, Ca. 92028
Posts: 14,261
|
Take the 2.4 bottom end (case, crank and rods) use the 2.2 T heads (port to 36mm)
and by a set of AA 86mm cylinders with JE pistons (9.5:1). Add a set of mod "S" cams. With the 40mm Webers you have a 180+ engine.
Edit: it looks like I read it wrong. When I first read the post I thought you had the 2.4 CIS engine as well. If not just buy a 2.4-2.7 crank & rods and build the same engine
Last edited by Henry Schmidt; 05-11-2011 at 03:46 PM..
|