Quote:
Originally Posted by sc_rufctr
It's been more than 20 years so I thought I would do a quick search.
Definitely the same spoon I handled. I remember the two tags on the barrel.
 |
ok heres the ingenius part. 1st there are no tools needed. upon taking slide off of receiver, you will see the above.
take barrel end, to inside right (facing you) of slide. you will note a lil itty bitty button on the right(facing you on bolt side), take long end of barrel(after removing recoil spring) and place long end against lil button against slide. push on it downward. this will release bolt from locking piece.
so easy a caveman can do it. you can do this and ASTOUND the counter salesman and see right away if:
1) its ever been used and how much(locking piece and bolt internals will be filthy black).
2) look at the bolt/locking piece for WEAR which will indicate it has been shot alot
3) condition of rollers(one on each side of bolt-same as 91/93/94) and how much it has been shot.
after cleaning and lube in every orfice, turn around and assemble in exact same reversed order always having BIG END of RECOIL SPRING on MUZZLE SIDE!
if i can figure the damn thing out.............anybody can.