|
Platinum Member
Join Date: Jul 2001
Location: Leave the gun. Take the cannoli.
Posts: 21,261
|
I have one very similar to that. Sometimes frustrating because of the round column, you have to re-index when you raise or lower the head. Don't know whats in the boxes, but with tooling shown probably worth between 500 & $650.
IMHO $900 is a little steep, you can get a newer tabletop mill with a dovetail column for under $1000.
Of course, If you have a use for it.
Last edited by dad911; 06-20-2011 at 09:35 PM..
|