|
Bruce, your link is screwed up.
I use the factory jack points and put 5-6" of wood (2x12x16s) under some wheel ramps under the front wheels. Use the t-bars for the rear w/ 6ton stands and some more wood. Pull the rear valence off. use a 4x4x24 just in front of the torsion tube to lift the car more once the engine is actually out of the car and on the ground.
I'll put the car up about a foot then pull the eng/tranny and put it on wood on the floor. Then raise the rest of the car up as needed.
Lots of threads w/ pics if you search around...
__________________
 Michael
'82 Euro SC 'Track Rat' 22/29 Hollows, 22/22 Tarrets, Full ERPB F/R, Rennline Tri Brace, Glass bumpers, Pro 2000's, 5 pts, blah blah blah
'13 Cayenne GTS
|