[al lkosmal]

Originally Posted by jrolstin

Ok I cannot find any leads going to the air flow metering sensor that would tell the fuel pump to shut off... where is the connection? I need more help understanding exactly how it is supposed to work...

Here is a pic, showing the safety switch connector (blue) on the front side (closest to the front of the car...I.E. hardest for you to reach in the engine compartment) of the air flapper housing. You can reach it by reaching around from the left side of the intake..........or you can remove the top rubber cover that connects the flapper intake to the throttle body and have better access.



PS: you will need to be able to read...and understand wiring diagrams...and have, and be able to use, a multi-meter to be able to debug the wiring in your car........if you are not handy at the reading/interpreting part or the use of a multi-meter.... holler for help and see if you can get somebody local to come out and help you debug. It's a bit confusing to the uninitiated...........and wiring issues are a PITA to chase down.