|
You should have two hot lines on the dryer (red, black, 220V between them), a neutral to run the motor (either hot line to the neutral white wire is 120 V), and a ground.
That's your four dryer wires.
Your welder likely only needs the two hot lines and the ground, probably no neutral required. Buy a dryer extension cord, or just a male connector and get a #8 or #10 three wire extension cord cable and connect it yourself. There should be a wiring diagram on the connector. If you buy a pre-wired cable it should be the four colors I mentioned above, white doesn't have to be connected to the welder.
__________________
"A machine you build yourself is a vote for a different way of life. There are things you have to earn with your hands."
|