|
My filters are the K&N that came new with my PMO 46 water-shield set up. I used the same bases and filters, I have just substituted the K&N tops after modifying the bolt spacing of the bases to match.
The holes for my velocity stacks are larger then those shown in "A" that is why I had to modify and use the bases that came with my set up. If the filters you have are K&N they should form to the K&N tops.
Try putting the filter in between the base and the top the filter should form to the outer edges of the top and base. If the filters dont work in one set, then they probably wont work in any and are meant for a different application.
__________________
78’ SC 911 Targa - 3.2SS, PMO 46, M&K 2/2 1 5/8” HEADERS, 123 DIST, PORTERFIELD R4-S PADS, KR75 CAMS, REBEL RACING BUSHINGS, KONI CLASSICS
Last edited by snbush67; 07-14-2011 at 01:11 PM..
|