|
Registered
Join Date: May 2008
Location: Portland Oregon
Posts: 304
|
No go. Still stumbles spits and pops at 26-2900. New plugs, cap, rotor, fuel filter, coil checked strong, new coil wire ends, all wires checked. Idles strong, starts easy, but backfires out the tail.
Put a dwell on the neg of the coil and grounded to the body. Reads zilch at all speeds. I am told this means that the coil is not gettting the input instructions from the dme.... is this right? If the dwell reads properly then the problem would be from the coil wire to the plugs.
About ready to take it in.
Got lots of experience in tune ups this week though.
__________________
-------
Glenn
86 3.2 Blk/Tan Wong'd Whale Coupe,
Dansk Pre, Monty
|