[kellzey]

The oil cooler is a Setrab unit from Patrick Motorsports.

I'm gonna flip the cooler over and mount the lines along the passenger side (through heater duct), and out through the rear heater pipe, under or over the engine mount, and to the engine area.

There is a fiberglass shroud that covers the cooler and holes will be cut in the floor pan to facilitate exaust of hot oil cooler air.

I have yet to get to the front area to cut the oil line holes. Have to remove the fuel tank first.

Fuel tank refurbishment is in my future (while the car is at the body shop).

Regards,