[175K911]

Originally Posted by Walt Fricke

Since this is a 911 list, most of you probably remember that for many years Porsche had two brackets which were screwed through the package shelf upholstery into the sheet metal. These were either for attaching luggage to the shelf, or for a snap strap to hold the rear seatbacks upright. They are a small potmetal casting, held with two ordinary sheet metal screws.

While teching for a DE I found a car with the shoulder harness straps attached to these.

OMG, and I thought the guy I failed because he'd attached his sub belt to the same little stud and nut that holds the DME Relay under the seat was bad.