[alt77]

Tony, that hose is the small dia. black plastic line that "T's" just before and above the throttle plate. I changed out the longer hose that attaches to the top of the accumulator via a goose neck fitting. I honestly did not want to change it out originally, but the plastic cracked and separated at the goose neck fitting. I attempted to reheat and push it on the the fitting with no success. It never cooled and shrank tightly on the fitting... that's when I decided to just replace it with standard 3/16th rubber gas hoses. I personally don't like having to clamp the hose ends...( I don't fires in the engine compartment )

After driving it around the block...I noticed that it wants to fluctuate at idle... from 200 rpm up to 1200 rpm. It may be running a little rich. Any ideas of why?