|
just me
Join Date: Dec 2004
Location: west orange new jersey
Posts: 1,201
|
hi folks! I have a question regarding a problem I have with my throttle linkage. I found this thread in the archives and the picture highlights a piece of the throttle linkage that I have the problem with. The linkage itself is fine, but the plastic piece that the linkage goes through as is passes from outside the car to the central tunnel has disentegrated and the throttle will not respond.
When I get the new plastic piece, can I replace it from inside the car, or do I need to go under the car?
__________________
1975 911s, 3.2l and 915 transmission front oil cooler RUF replica bumper ducktail and SC rear flares SW chip ssi's m&k 2 in 1 out sc front calipers PF 97 pads fuchs 16 x 7 and 8 225/ 245 toyo ra-1s 22/29 torsion bars 25mm Charlie Bars Neatrix bushings lowered and corner balanced DAS bolt in roll bar kirkey seat 5 point harnesses.
http://www.hairydoggrrrage.com/
|