Quote:
Originally Posted by 911pcars
That's a very nice, clean refurb and install. Congrats. However......
... you mentioned earlier the plan was to corner balance. You can still do it to a certain extent, but the lack of adjustable drop links on the sway bars precludes independently adjusting ride height at each corner w/o affecting all corner weights.
Just a FWIW.
Sherwood
|
Sherwood - yeah figured that and I was just parusing the home alignment archives for the board - pretty dizzying. I did read that you need to disconnect the sway bars for an accurate corner balance - or very accurate. I guess I will get as close as I can with the sway bars attached.
I wouldn't mind spending a little bit of money on some tools to make things easier for alignments and it is always something I wanted to learn/do. Not sure I want to invest the time with a complete DIY setup with alot of fab and time
Most of the digital gauges are fairly inexpensive - I was thinking of using a couple of those(caster/camber) in conjunction with a laster string method for tow etc.
I have no idea how to do this but was researching. One thing I don't have is scales to see where I am at. I would like to get the ride height and weights close with a resonable alignment.