|
Registered
Join Date: Nov 2003
Location: Marietta, GA (Atlanta)
Posts: 873
|
Your '75 will probably not have jack pads at the locations marked with an "X" in the diagram above. Use a length of 2x4 to avoid damage to the body. The two middle X's are the center jack locations (factory jack post or a jackpad insert for use with a floor jack) do not put a jack stand there. The "O" locations are the suspension mouting points or torsion tubes, and will accomodate a jack stand but generally not a jack as indicated above.
Put your tires under the car when working on it in case a jack stand slips...safety first!
__________________
'88 Carrera Cab 3.2 Diamond Blue Metallic - ERP Polybronze Bushings, ERP Monoballs, SW Chip, Bilstein Sports, 930S Steering Wheel, DAS Rollbar, Sparco 5pt Harness, Hunsaker Sport Seats, Dansk Pre-Muffler, MK 1in-1out Exhaust, Magnecor KV8.5 Wires
'86 944NA, Sunroof Delete, Track Rat, Full Cage
'72 914 1.7 Guards Red / '02 Audi S4 Light Silver Metallic
|