Quote:
Originally Posted by jamess2
I don't mean to sound dumb but what do I need to do? I can turn wrenches but this wiring stuff blows me away
|
Make a triple jumper wire like this.
Pull the DME relay.
Insert the triple jumper into the DME relay socket on terminals 30, 97 and 87b.
The fuel pump will run and the injectors will be supplied with 12V.
Start the car and see if it will run.
If it does not run, remove jumper on terminal 87b to turn off the fuel pump.
With a digital meter, test for 12V at the injector plug. It should have 12V. If it does not, you have a wiring issue.