|
Did this just the other day -I just tightened up the female end (goes on the spade) with pliers to ensure no slop, and put some white silicone grease on the contacts - then plugged it and unplugged it a few times to etch the male end up. On the bulb sockets, gave it a shot of WD-40 followed by some pushing in and out with the finger, then more white silicone inside. Works fine now.
If you're anal, you can go get some electrical contact cleaner and squirt it in there, but doubt it'll do a much better job.
__________________
In the movies only bad guys sleep in king size beds.
|