[JMPRO]

Greg, you most likly need to adjust the catch on the body, but first make sure all you need is to lube the latch on the door . The catch on the door frame can be loosened with an allen wrench but you should really use the torks bit as the allen wrench will most likely strip out the bolt head. mark around the catch where it is now so you have a referance as to how far you move it. A little goes a long way, so move small amounts at a time. When you tighten the catch down you really have to lean on the wrench so that the door does'nt bump it out of place after a few slams. good luck
Jerry