Ok, I also realized that I had not shown the Electronics. Here is the entire Package of Wires and ECU.
The EZ People show a pic of using a Drill to Notch the Steering Box Shaft. I do not have a Diamond Drill, So I used a Colbalt to make Marks, then a Dremmel Tool to Notch the Shaft to clear the Bolt. I also screwed the Bolt in the other side to make sure when drilling that somehow I did not get into the threads and Muck the U Joint up.
Here is the U Joint Bolted in Place to the Steering Box.
I bought a New Steering Shaft Cover and for a change cut it perfect the1st time. I hated the "Speed Nuts" Porsche uses so went to McMaster Carr and got their 1/4 inch removable Nuts and Hammered them to close the hole and they Fit Perfect. (It is the Little things that count)
Now I am
"FINALLY" at the point of Installing the ECU and Wire this thing for sound. I looked a lot of places but this one looks the best for Accessibility. I need to figure out some kind of Bracket.
