Got a Late Start because of the Hurricane and would would have Finish if I had 2 more Hours. I need to make 1 Bracket and put 1 wire on the Positive of the Battery, Ground 2 wires and run 1 wire to Switched Positive!
I spent a lot in the Dash today mounting the Potentiometer. Need a Much Smaller Knob because I had Originally planed to mount it under the Dash where you would dial it by feel and it needed to be bigger. While I was at it I mounted the Blue light rocker Switch for the Fan I am going to mount on my Oil Cooler.
I installed the Defroster and blower which scarred the Hell0 out of me because at first I could not get it in over the PS Motor. Then I removed the 1 mount Bolt and rotated it as far clockwise as I could and the DeFrost unit when right in.
.
Next, Looking at the Inventor's Pics I realized that he was not using a later (1981 to 1983) 911 that has the ECU Box mounted up front. I made some Adjustable Brackets out of 1/8 x 1" Flat Aluminum and Ended up needing to loosen everything and push it over to the Right to clear the Defrost Blower Box. If I ever go in there again I will lower it 1/4 inch more. I had to grind the Ridges from the Mounting Strap in the cover to make it fit. I also had to trim out a small 1/2 Circle like the instructions show.
Here is where I ended up tonight. and Hopefully I will be finished either tomorrow night or Tuesday.
