[fletch944t]

Hi John,

There are a number of different pods that you can get to fit a 944 A-pillar. However, none without modification. Before some of these places started offering the dual pods specifically for 944s, there was no other option though.

I ordered a single gauge pod for a late model Eclipse from Extreme Motorsports. The sides are two deep for the 944 A-pillar so you have to trim the side down gradually until you get the correct length. Then take a heat gun and heat the sides of the pod until they are pliable, as soon as you remove the heat press the pod against the A-pillar to get it to mold to the form of the A-pillar. Hold it there for about 30 seconds and it will retain the shape even though it hasn't completely cooled.

All of the aftermarket pods come in black so, if you don't have a black interior and you want it to match, you can get the pod dyed to match the interior. I didn't know this when I did my single gauge pod. However, when I bought my dual gauge pod, I took it to a local stereo shop that specializes in car audio and they dyed the pod burgundy to match the interior of my car perfectly.

Hope this helps.

Regards,
Clark