|
Registered
Join Date: Jun 2001
Location: Lake Oswego, Oregon
Posts: 874
|
You will find two(2) adjustment screws for the winding height(up) asnd one for the lateral tilt athe front of the door, these are located under the door, so you are going to have to get down on the ground. The screw you want to adjust is the one further forward, make small adjustments try it and then either stop or adjust.
The other thing you may want to do is remove the door panel and make sure everything on the window glass is in place. I have had a couple of the early cars where the weld on the piece that secures to the glass had broken leaving the glass to kind of flop around in the channel.
Good luck.
Craig C. Laughlin CAMP 914
__________________
Craig C. Laughlin CAMP 914
Helping to bring your 914 into the 21st century.
http://www.camp914.com
|