Quote:
Originally Posted by E-man930
That's some wiggly-wompus weave action you have going on in there Juice - do you vacuum mold these? I'm hoping this is a one off incedent...
|
While this was due mainly to a rush to get the "prototype" kevlar/cf reflector done it should be noted that even $3m super cars have weave that gets wavy here and there especially on a rounded edge. Our parts are vacuum bagged, but also due to the difference in tensile strength versus durability, the kevlar waved on the edges when the carbon flexed.
Such as the rear on the Pagani, waves do happen even to the best of them:
