Quote:
Originally Posted by scott.k
thanks for the help, I was thinking of using the nrg short hub and a normal length quick release, but if those ones are bad too, than I will go with something else.
Thanks
Scott
|
The standard NRG quick release works well, but I'm not sure if they make a hub that will fit the porsche 911 steering column. You need a hub that attaches to the Porsche steering column that the quick release bolts to (unless you use a weld-on release). To further clarify, there will be 4 pieces in the system: the hub (Momo, Sparco, Nardi, Rothsport, etc) that is attached to the splines on the steering column, then the quick release receiver is bolted to that, then the quick release snaps on to that (this is part travels with the steering wheel), and then the steering wheel is bolted to the quick release.